VCS Vehicle Communication Scanner Interface Highlights:
Works with Over 40 makes, 1,000 vehicle system, including CANBUS systems
Access to Power train, Chassis and Body systems
One click "Quick Test" button to scan all ECUs
Live data display with waveform displays
Component-level and System-level activations
Reset and clear adaptations, calibrations and service functions
Hyundai and VW/ Audi immobilizer special functions
ECU initialization and coding
SAE J2534 "Pass-thru" ECU reprogramming
Nissan/ Infiniti idle speed self learning function
Frequent Internet software updates
Multi-language for international market demand
"PC-link" functions for PC operations
VCS Vehicle Communication Scanner Interface Coding & Programming:
Read & change coding has now become highly important for any new retrofit control unit in the vehicle. Contact VCS Vehicle Communication Scanner Interface Dealer for more information.
VCS Vehicle Communication Scanner Interface Other Functions:
Self-learn Function
Create a personalized database system to record ideal conditions of the actual values in the vehicle system.anydiag.com
Record 160 Frames of Live Data
Record a real-time data stream up to 160 frames during a drive cycle. More complicated diagnosis of an intermittent problem will require the use of this function to evaluate data stream during a controlled drive cycle
VCS Vehicle Communication Scanner Interface Note: VCS Vehicle Communication Scanner Interface do not contain bluetooth function.

www.anydiag.com

skype:anydiag2
MSN:anydiag2@hotmail.com

VCS Vehicle Communication Scanner Special Functions:
Service Resets & Initialization:
When components (e.g. injectors, switches, mass air flow sensor, cooling temp sensor, etc.) are replaced within a module, a vehicle will run very rough. Initialization immediately re-adapts all the values, so the components will be recognized by the vehicle system. (e.g. To reset the service indicator for the vehicle such as "oil service", "service reminder light", "steering angle sensor*", etc.)
VCS Vehicle Communication Scanner Adjustment:
VCS Vehicle Communication Scanner is able to adjust performance parameters. (e.g. idle RPM, idle speed adjustment, ignition timing, vehicle w/ immobilizer, set fuel synchronization, throttle-body relearn, DME Alignment, etc.)anydiag.com
VCS Vehicle Communication Scanner Coding & Programming:
Read & change coding has now become highly important for any new retrofit control unit in the vehicle. Contact VCS Vehicle Communication Scanner Dealer for more information.
VCS Vehicle Communication Scanner Highlights:
Works with Over 40 makes, 1,000 vehicle system, including CANBUS systems
Access to Power train, Chassis and Body systems
One click "Quick Test" button to scan all ECUs
Live data display with waveform displays
Component-level and System-level activations
Reset and clear adaptations, calibrations and service functions
Hyundai and VW/ Audi immobilizer special functions
ECU initialization and coding
SAE J2534 "Pass-thru" ECU reprogramming
Nissan/ Infiniti idle speed self learning function
Frequent Internet software updates
Multi-language for international market demand
"PC-link" functions for PC operations
www.anydiag.com

skype:anydiag2
MSN:anydiag2@hotmail.com

Carprog full v4.01 Function:
1. Make the Universal tool: Carprog full v4.01 inside have powerful 16-bit MPU and full set of automotive interface drivers. In basic version you will get hardware with extra functions: 12 input/output pins for EEPROM in-circuit programmer, future possibility's to make on the same hardware Microcontroller Programmer, Immobiliser Transponder key programmer with antenna adapter for 125/134 kHz, K-line diagnostic (dashboard odometer programming, immobilizer key programming), CAN line diagnostic,+5V/+12V output, USB, power supply only from USB.anydiag.com
2. Make the Low Cost tool: with Carprog full v4.01 basic you will receive many extra functions (like car radio code calculator CC1, EEPROM programmer and VAG dashboard's programmer by CAN) and all additional software's you can buy extra according your need.anydiag.com
3. Make it User Friendly: Windows XP software, works without any installations, on all PC, use USB to PC link, all adapters schematics diagrams on-line.anydiag.com
Carprog full v4.01 Softwares:
ECU-OPEL - OPEL login reader from motor hybrid ECU. Works with Bosch ME1.5.5, Siemens SIMTEC71, SIMTEC71.1, Delco Diesel, Delco Multec.
OPEL CAN - Opel ECU by CAN programmer - read/change mileage in EDC16, MT35E, HSFI 2.2 read PIN, reset ECU
PSG16 - Opel PSG16 diesel pump by OBDII - read/change mileage, read PIN, reset ECU
OPEC28 - Opel Siemens Simtec ECU Tool Advanced
www.anydiag.com

skype:anydiag2
MSN:anydiag2@hotmail.com

CN900 Key Programmer Main Functions:
CN900 Key Programmer Function 1:
(1) Read out the chip code for 11 12 13 33 T5  40 41 42 44 45 46 48 4C 4D 8C and 8E chips. With the detail format for ID 48 and 4D Chips.anydiag.com
(2) New identify functions for Toyota "G" chip key  (year: 2010) (Chip: 4D-72).
And CN900 Key Programmer will show if the key is the main key or the vice key for Toyota, and later will add new identify function for the Chinese Car.
CN900 Key Programmer Function 2:
CN900 Key Programmer can identify Toyota smart key, and read out the data.
CN900 Key Programmer Function 3:
CN900 Key Programmer supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.
Using "FREE" dedicated chips can copy none battery 4C and 4D chips directly.(Remark :cn1(4C),cn2(4D) is the name of special chip)anydiag.com
Later, CN900 Key Programmer will add the function for copying ID 46 chip.
CN900 Key Programmer Function 4:
Connecting with Chinese PC software, CN900 Key Programmer can save the read key code data unlimited.
CN900 Key Programmer Function 5:
Support on the chip programming: with the inner function of HITAGETI, CN900 Key Programmer can write ID 46 Renault Crypto chips.anydiag.comCN900 Key Programmer is new key copy machine, it is also new Auto transponder chip key copy machine. Using 3.6-inch TFT LCD display, touch screen operation.anydiag.com

CN900 Key Programmer is new key copy machine, it is also new Auto transponder chip key copy machine. Using 3.6-inch TFT LCD display, touch screen operation.anydiag.com
CN900 Key Programmer Main Functions:
CN900 Key Programmer Function 1:
(1) Read out the chip code for 11 12 13 33 T5  40 41 42 44 45 46 48 4C 4D 8C and 8E chips. With the detail format for ID 48 and 4D Chips.anydiag.com
(2) New identify functions for Toyota "G" chip key  (year: 2010) (Chip: 4D-72).
And CN900 Key Programmer will show if the key is the main key or the vice key for Toyota, and later will add new identify function for the Chinese Car.
CN900 Key Programmer Function 2:
CN900 Key Programmer can identify Toyota smart key, and read out the data.
CN900 Key Programmer Function 3:
CN900 Key Programmer supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.
Using "FREE" dedicated chips can copy none battery 4C and 4D chips directly.(Remark :cn1(4C),cn2(4D) is the name of special chip)anydiag.com
Later, CN900 Key Programmer will add the function for copying ID 46 chip.
CN900 Key Programmer Function 4:
Connecting with Chinese PC software, CN900 Key Programmer can save the read key code data unlimited.
CN900 Key Programmer Function 5:
Support on the chip programming: with the inner function of HITAGETI, CN900 Key Programmer can write ID 46 Renault Crypto chips.anydiag.com
CN900 Key Programmer Function 6:
Without removing the ECU (Benz W140), CN900 Key Programmer can start the chip.
CN900 Key Programmer Function 7:
CN900 Key Programmer can unlock the 48 chips except the crypto lock 48 chips.
CN900 Key Programmer Function 8:
Support on the pin code calculating for Hyundai and Kia (before 07 year), by using the Last 6 Codes of VIN Number.
CN900 Key Programmer Function 9:
Support on starting the key and calculating the pin code for more than 60 kinds of cars.
Support on programming all kind of Fiat key, such as (11,13 and 33), These 3 kinds of 48 chips anti-theft way.anydiag.com
CN900 Key Programmer Function 10:
CN900 Key Programmer Upgrade to identify HONDA_46 CRV_46/CIVIC_46/Mitsubishi 46
Ordinary 60 can be programmed to be 66/67/68/71/74
CN900 Key Programmer Function 11:
CN900 Key Programmer Upgrade to copy CN1 (4C), CN2 (4D) chip .And size is 6mmX12mmX4mm
Support on the software update, such as adding new function for copying the induction card for Electronic Gate.

www.anydiag.com

skype:anydiag2
MSN:anydiag2@hotmail.com

Ford-VCM OBD is professional device for ford vehicles,Ford-VCM OBD has the most functions of ford vcm ids, Ford-VCM OBD is the mini version of ford VCM ids.Ford-VCM OBD works on  ford car by OBD2 port directly.anydiag.com
Ford-VCM OBD is diagnostic software for Ford vehicles. Ford-VCM OBD is designed for ford,mazda,and other few brand cars,really working very well with those cars 1996-2010, some 2011 cars.
Ford-VCM OBD is diagnostic programmer for Ford vehicles 1996-2010. Ford-VCM OBD can connect to various electronic control units (ECUs) and display identification, read and clear fault code memory, display and record measured values and perform actuator tests,some key programmer,etc.anydiag.com
Ford-VCM OBD Note:
1. Ford-VCM OBD is capable of clearing PCM fault code memory. Please note that all problems need to be fixed, otherwise MIL comes up immediately again.
2. Ford-VCM OBD is capable of clearing airbag fault code memory. Please note that all airbag related problems need to be fixed manually.
3. Ford-VCM OBD supports both coded and timed PATS. In connection with PATSCODE.com service you can do all immobilizer-related operations including ECU swapping.anydiag.com
4. Ford does not use fixed-pin security scheem for PATS. Instead of fixed code, OUTCODE-INCODE challenge-response scheme is used (so called CODED PATS). Ford-VCM OBD can work with CODED PATS. You can use patscode.com service to obtain INCODE for PATS authorization
5. patscode can be used with both Ford-VCM OBD and Ford IDS.
6.Ford-VCM OBD requires proprietary interface because ELM32x-style interfaces do not support all protocols and pinouts to perform full diagnosis.
7. Ford Ka (model year 2009 and later) is manufactured in cooperation with Fiat. In fact this is Fiat-based, so you need to use tools such as  Fiat Examiner to diagnose this vehicle.
8. patscode.com works on all Ford and Mazda vehicles equipped with coded PATS with one exception: 2010 Ford US models (European and some other 2010 Fords work fine).
9.In order to obtain INCODE you need to fill in at least VIN code and OUTCODE, which means that tools such as Ford IDS/VCM, MVP or AD100 will work.anydiag.com
10. MSCAN is mid-speed CAN-BUS in Ford vehicles used to interconnect body and infotainment control units.
11.Bootloader is part of firmware code in control unit used for re-flashing purposes (it does not get updated during flash update process).
12. Secondary bootloader is code uploaded by Ford-VCM OBD to RAM of control unit. It is used for functions not supported by built-in bootloader.anydiag.com
13. CART or DCL is communication bus used on pre-1996 Ford models (Escort up to 2000). It is available through Ford-specific data link connectors.
14. INCODE is response part of CODED PATS challenge-response authentication mechanism. It is 16bit hexadecimal number Ford-VCM OBD or other diagnosis tester needs to send to a control unit in order to complete PATS operation. This number can be obtained using patscode.com service.
15. OUTCODE is challenge part of CODED PATS challenge-response authentication mechanism. It is 24bit hexadecimal number provided by a control unit. This number changes in time and is used by patscode.com service to calculate INCODE.

www.anydiag.com

skype:anydiag2
MSN:anydiag2@hotmail.com

DIGITAL COUNTER REMOTE MASTER suitable for the remote control and the match of anti-theft annunciator, decoding, debugging and check. (Including Auto theftproof implement, wireless theftproof implement, garage door remote control, and electric control door remote control.anydiag.com
Function includes Chinese-English transition menu, frequency display, remote control copy, remote control regenerate, line inter-transfer and upgrade and so on. It is suitable for the remote control and the match of anti-theft annunciator, decoding, debugging and check. (Including Auto theftproof implement, wireless theftproof implement, garage door remote control, and electric control door remote control.anydiag.com

VAG KM IMMO TOOL NEC 24C32 Module Options
Supported cars:
VW Golf 6 - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
VW Passat, Passat CC - 2009+ with NEC and 24C32 EEPROM - odometer programming  by OBDII;
VW Tiguan - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
VW T5 - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
VW Polo  - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
Skoda Octavia 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
Skoda SuperB - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
Skoda Roomster, Yeti - 2009+ with NEC and 24C32  EEPROM - odometer programming and immobiliser data read  by OBDII;
Seat Ibiza - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
VW Multivan - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
VW EOS - 2009+ with NEC and 24C32 EEPROM - odometer programming by OBDII;
VW Caddy - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
VW Scirocco - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
VW Bora - 2010+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
VW Jetta - 2010+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
Skoda Fabia 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
Skoda Altea - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
Skoda Yeti - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
Skoda Altea - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
Skoda Exeo - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read  by OBDII;
VAG KM IMMO TOOL GOLF6 MM7  Module Options
suppoted cars:
VW Golf 6 - 2010 with MM7 (9S12) EEPROM - odometer programming and immobiliser data read by OBDII;
VW Tiguan - 2010+ with MM7 (9S12) EEPROM - odometer programming and immobiliser data read  by OBDII;

www.anydiag.com

skype:anydiag2
MSN:anydiag2@hotmail.com

AK48 Fiat Key Programmer Functions:
M1: Erasing all keys and programming new keys(press M1 3 times) when you lost all keys
M2: Add new keys (don't need to remove the original keys)
AK48 Fiat Key Programmer Specifications:
Support Fiat Siena, Palio, Weekend those models with Megatons encrypt ID48 chip (work with 93LC66 of BSI computer)
No need to connect computer and operate easily, 9V battery inside and no need to connect the supply power.
AK48 Fiat Key Programmer using method:
1. Remove BSI PC from the car, the BSI PC is in the left side of the driver, with the insurance seat for one seat. Need to remove the whole insurance box, and take out the BSI PC from the back of the insurance box, then weld 93LC66.
2. After remove 93LC66, clear all the feet of 93LC66, insert 93LC66 to the adapter of this programmer, then connect the adapter to the Programmer.
3. Switch on the LED turn red then turn green, which mean the programmer self-test is normal.
4. Choose M1 or M2 to program keys. If the led light twinkles one time and the loudspeaker loud one time, it shows that the programming is success. If LED lighting 5 times, and loudspeaker loud 5 times, it shows the wrong 93LC66 data or couldn’t find the 93LC66, need to check it is wrong with the connection or placement of the feet of 93LC66, and program keys again; If LED lighting 10 times, loudspeaker loud 10 times, it shows the ID48 chip is locked or the type of chip is wrong, need to program again.
skype:anydiag2
MSN:anydiag2@hotmail.com

Tag Key Tool Supported transponders:

Atmel TK5551
Temic 11
Temic 12
Megamos 13 (fixed identifier)
Megamos 48 (Megacrypt I)
Megamos 8E (Megacrypt II)
Philips PIT - 7930/7931/7935 (PIT)
Philips HITAG2 – 7936, 7941, 7942, 7943, 7944, 7945, 7946, 7947, 7952, 7953, 7961

Tag Key Tool is compatible with AN020 and ZN001 transponder programmers. Just need dump from your immobilizer, put your NEW KEY (or transponder) on the programmer and generate working key.You can also produce preprogrammed transponders for a different vehicle. This programmer works with AVDI interface. Tag Key Tool also is compatible with VAG, BMW, Renault, Nissan, Mercedes and Fiat.anydiag.com

If you lost the key programmer, you can use Tag Key Tool,but you must have the authorized software.

Tag Key Tool Supported car list:
Utilities for keys generation by dump of immobilizer unit:
Acura CSX. Valeo 24C04 or 93C66
Acura MDX. Valeo 24C04 or 93C66
Acura RDX. Valeo 24C04 or 93C66
Acura TL. Valeo 24C04 or 93C66
Acura TSX. Valeo 24C04 or 93C66
Acura. Immo 93C46.Megamos 13
Alfa Romeo 145. Bosch 93C46
Alfa Romeo 146. Bosch 93C46
Alfa Romeo 147. Marelli HC912DG128 or 9S12DG256
Alfa Romeo 155. Bosch 93C46
Alfa Romeo 159. Marelli MC9S12DG256
Alfa Romeo 165. Bosch 93C46
Alfa Romeo GT. Marelli HC912DG128 or 9S12DG256
Alfa Romeo GTV. Bosch 93C46
Alfa Romeo Mito. Delphi 93C86
Alfa Romeo Spider. Bosch 93C46
Aprilia bike.Cluster 24C16
Audi A8 2003+. Key by dump of KESSY - 93C86
Audi A8 2003+. Dealer's key by dump of KESSY - 93C86
Audi A8 2003+. Dealer's key by dump of ECU
Audi A6 2004+. Key by dump of EZS - 9S12
Audi A6 2004+. Dealer key by dump of EZS - 9S12
Audi A6 2004+. Unlock key by dump of EZS - 9S12
Audi Allroad 2004+. Key by dump of EZS - 9S12
Audi Allroad 2004+. Dealer key by dump of EZS - 9S12
Audi Allroad 2004+. Unlock key by dump of EZS - 9S12
Audi Q7. Key by dump of EZS - 9S12
Audi Q7. Dealer key by dump of EZS - 9S12
Audi Q7. Unlock key by dump of EZS - 9S12
Bentley Arnage. Key by dump of 68HC911EA9
Bentley Continental.Key by dump of KESSY - 93C86
Bentley Continental.Dealer's key. KESSY - 93C86
Bentley Continental.Dealer's key by dump of ECU
BMW Bikes. ECU Bosch M58BW0160
BMW EWS1
BMW EWS2
BMW EWS3. Key by dump of 68HC911EA9
BMW EWS4
BMW CAS1
BMW CAS2
BMW CAS3
www.anydiag.com

skype:anydiag2
MSN:anydiag2@hotmail.com