bokee.net

电子/电气工程师博客

正文 更多文章

RTCA/DO 160G Testing,Testing companies in China,GRGT

RTCA/DO 160G Testing

 

GRGT has the facilities, accreditations and experience to accurately and efficiently perform testing to a wide range of military and aerospace specifications, including the latest lightning tests.

 

How is GRGT uniquely qualified to meet your airborne equipment testing requirements?

 

Full service laboratories in Maryland, California and Texas 

Secure facilities 

Highly-trained personnel 

One-stop-shop for EMC & Environmental Simulation requirements 

Reverberation Chamber for HIRF over 20,000 V/m 

45kVA fully programmable power supply with Section 16 Power Input plus Boeing and Airbus specific test software. DC through over 1000Hz output frequency. 1/3-phase output 

20kVA variable power supply, 400Hz, 1/3-phase output 

Three RF anechoic EMC chambers with 1/3-phase 400Hz RF power filters with Power Factor Correction Coils (PFCCs) and RF filtered DC power 

Up to 150VAC line to ground, 3-phase, 400Hz, 100A per phase, RF filtered power 

Up to 277VAC line to ground, 3-phase, 400Hz, 50A per phase, RF filtered power 

Acceleration Testing Capabilities up to 40 Gs 

GRGT Labs is NVLAP- or A2LA-accredited to perform RTCA/DO160 Commercial Aircraft Product testing to RTCA/DO-160D (1997), RTCA/DO-160E (2005) & RTCA/DO-160F (2007).

 

RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment

 

Section 4 – Temperature and Altitude 

Section 5 – Temperature Variation 

Section 6 – Humidity 

Section 7 – Operational Shocks and Crash Safety 

Section 8 – Vibration 

Section 9 – Explosion Proofness 

Section 10 – Water Proofness 

Section 11 – Fluids Susceptibility 

Section 12 – Sand and Dust 

Section 13 – Fungus Resistance 

Section 14 – Salt Spray 

Section 15 – Magnetic Effect 

Section 16 – Power Input 

Section 17 – Voltage Spike 

Section 18 – Audio Frequency Conducted Susceptibility – Power Inputs 

Section 19 – Induced Signal Susceptibility 

Section 20 – Radio Frequency Susceptibility (Radiated and Conducted) 

Section 22 – Lightning Induced Transient Susceptibility 

Section 24 – Icing 

Section 25 – Electrostatic Discharge (ESD)

 

GRGT also tests to proprietary aircraft manufacturer standards: 

Airbus: ABD0100.1.2 Environmental Conditions and Tests Requirements Associated to Qualification 

Airbus: ABD0100.1.8.1 Electrical and Installation Requirements 

Boeing: 787B3-0147 Electrical Power Quality and Design Requirements Document 

Boeing: D6-16050-5 Requirements for Electromagnetic Interference Control 

HIRF Testing (High Intensity Radiated Fields)

 

High Intensity Radiated Fields (HIRF) testing is a form of EMC testing applicable to equipment that is subject to extreme electromagnetic environments or critical equipment whose failure would be hazardous to human safety.

 

HIRF requirements are applied to ensure that the aircraft electrical and electronic systems are able to continue safe operation without failure.

 

HIRF specifications that GRGT performs: 

FAA HIRF Rule & Advisory Circular 20-158 

RTCA/DO-160E/F/G 

Boeing Requirements 

Airbus Requirements

 



Contacts: Michael Lee

E-mail : lisz@grgtest.com

Tel: +86 13808840060

WeChat:13808840060


分享到:

上一篇:汽车被动电子元器件AEC-Q200认

下一篇:整车控制器环境、EMC试验,汽车EC

评论 (0条) 发表评论

抢沙发,第一个发表评论
验证码