bokee.net

电子/电气工程师博客

正文 更多文章

RTCA/DO-160 E/F/G test mechanism in China,Accredited by FAA,EASA,CAAC

RTCA/DO-160 E/FG test

 

GRGT has the facilities, accreditations and experience to accurately and efficiently perform

testing to a wide range of military and aerospace specifications, including the latest lightning

tests.

How is GRGT uniquely qualified to meet your airborne equipment testing requirements?

Full service laboratories in Maryland, California and Texas.


Secure facilities

Highly-trained personnel

One-stop-shop for EMC & Environmental Simulation requirements

Reverberation Chamber for HIRF over 20,000 V/m .

45kVA fully programmable power supply with Section 16 Power Input plus Boeing and Airbus

specific test software. DC through over 1000Hz output frequency. 1/3-phase output

20kVA variable power supply, 400Hz, 1/3-phase output .

Three RF anechoic EMC chambers with 1/3-phase 400Hz RF power filters with Power Factor

Correction Coils (PFCCs) and RF filtered DC power .

Up to 150VAC line to ground, 3-phase, 400Hz, 100A per phase, RF filtered power .

Up to 277VAC line to ground, 3-phase, 400Hz, 50A per phase, RF filtered power .

Acceleration Testing Capabilities up to 40 Gs .

GRGT Labs is NVLAP- or A2LA-accredited to perform RTCA/DO160 Commercial Aircraft

Product testing to RTCA/DO-160D (1997), RTCA/DO-160E (2005) & RTCA/DO-160F (2007).

RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment.

Section 4 – Temperature and Altitude
Section 5 – Temperature Variation
Section 6 – Humidity
Section 7 – Operational Shocks and Crash Safety
Section 8 – Vibration
Section 9 – Explosion Proofness
Section 10 – Water Proofness
Section 11 – Fluids Susceptibility
Section 12 – Sand and Dust
Section 13 – Fungus Resistance
Section 14 – Salt Spray
Section 15 – Magnetic Effect
Section 16 – Power Input
Section 17 – Voltage Spike
Section 18 – Audio Frequency Conducted Susceptibility – Power Inputs
Section 19 – Induced Signal Susceptibility
Section 20 – Radio Frequency Susceptibility (Radiated and Conducted)
Section 22 – Lightning Induced Transient Susceptibility
Section 24 – Icing
Section 25 – Electrostatic Discharge (ESD)

GRGT also tests to proprietary aircraft manufacturer standards:

Airbus: ABD0100.1.2 Environmental Conditions and Tests Requirements Associated to

Qualification

Airbus: ABD0100.1.8.1 Electrical and Installation Requirements

Boeing: 787B3-0147 Electrical Power Quality and Design Requirements Document

Boeing: D6-16050-5 Requirements for Electromagnetic Interference Control

HIRF Testing (High Intensity Radiated Fields)

    High Intensity Radiated Fields (HIRF) testing is a form of EMC testing applicable to

equipment that is subject to extreme electromagnetic environments or critical equipment

whose failure would be hazardous to human safety.

   HIRF requirements are applied to ensure that the aircraft electrical and electronic systems

are able to continue safe operation without failure.

HIRF specifications that GRGT performs:


FAA HIRF Rule & Advisory Circular 20-158
RTCA/DO-160E/F/G
Boeing Requirements
Airbus Requirements

Please email me the test requirements and sample information.

E-mail address:lisz@grgtest.com

分享到:

上一篇:电子元器件二次筛选,军工设备元器件筛

下一篇:元器件、PCB、芯片、模组工艺质量评