1.4313+QT650热轧不锈钢 棒材板材

 不锈钢1.4313是马氏体级，耐腐蚀性高，热处理后耐久性好。X3CrNiMo13-4钢的机械性能是由于化学成分中钼和镍的高含量。这些合金添加剂限制了增加a级碳含量的需要——给定浓度相当于奥氏体不锈钢。虽然镍含量不高，但镍含量约为4%，显著提高了钢对各种腐蚀环境的抵抗力——二次机械性能。X3CrNiMo13-4钢用户可生产高达300℃在温度下工作的零件和零件，以及暴露在各种腐蚀环境中的零件，同时保持足够的表面条件括抗氯化物性质)。QT650.QT780和QT900条件下，热处理后*常交付型钢。半成品用于石油生产.化工.在冶金和能源行业，涡轮机暴露在高温和低温下.泵.压缩机部件。钢不适合焊接。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050

Si (％): ≤ 0.70

Mn (％):≤ 1.50

P (％)≤:0.040

S (％)≤:0.030

Cr (％): 12.0 ~ 14.0

Ni (％): 3.50~ 4.50

Mo (％):0.30 ~ 0.70

Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealed

Hardness HBS: 320

Tensile strength σb/MPa:1100

Thickness/≤mm: 60

Condition of thermal treatment: QT650

Yield strength σ0.2≥/MPa:520

Tensile strength σb/MPa:650~830

Elongation δ( longitudinal )≥(％):15

Impact absorbing power Akv≥/J| longitudinal:70

Thickness/≤mm: 60<d≤160

Condition of thermal treatment: QT650

Yield strength σ0.2≥/MPa:520

Tensile strength σb/MPa:650~830

Elongation δ(transversal)≥(％): 12

Impact absorbing power Akv≥/J|transversal: 50

Thickness/≤mm: ≤160

Condition of thermal treatment: QT780

Yield strength σ0.2≥/MPa:620

Tensile strength σb/MPa:780~980

Elongation δ( longitudinal )≥(％):15

Impact absorbing power Akv≥/J| longitudinal:70

Thickness/≤mm: ≤160

Condition of thermal treatment: QT900

Yield strength σ0.2≥/MPa:800

Tensile strength σb/MPa:900~1100

Elongation δ( longitudinal )≥(％):12

Impact absorbing power Akv≥/J| longitudinal:50

供应EN1.4313马氏体不锈钢具有退火特性（+A）状态、淬火和回火(+QT650)调质(+QT700)，调质(+QT780)，调质(+QT900)，需要哪一个一定要跟业务说清楚哦。